Wheel Bolt Pattern by Make and Model
ES 250 ~ ES 300 ~ ES 330 ~ ES 350 ~ GS 300 ~ GS 350 ~ GS 400 ~ GS 430 ~ GS 450 ~ GS 460 ~ GX 470 ~ IS 250 ~ IS 300 ~ IS 350 ~ IS F ~ LS 350 ~ LS 400 ~ LS 430 ~ LS 460 ~ LS HL ~ LX 450 ~ LX 470 ~ LX 570 ~ RX 300 ~ RX 330 ~ RX 350 ~ RX 400 ~ RX300 ~ RX330 ~ SC 300 ~ SC 400 ~ SC 430 ~ SE 330 ~ All LEXUS Model(s)
LEXUS Bolt Pattern(s):
LEXUS Wheel Size(s):
LEXUS Models / Bolt Pattern and Wheel Size Information:
1990-91 LEXUS ES 250
1992-03 LEXUS ES 300
1992-97 LEXUS ES 300
2004-06 LEXUS ES 330
2007-08 LEXUS ES 350
1993 > LEXUS GS 300
1993-06 LEXUS GS 300
2007-08 LEXUS GS 350
1998-00 LEXUS GS 400
1998-01 LEXUS GS 400
2001 > LEXUS GS 430
2001-07 LEXUS GS 430
2007-08 LEXUS GS 450H
2008 LEXUS GS 460
2003 > LEXUS GX 470
2003-08 LEXUS GX 470
2006-08 LEXUS IS 250 AWD, RWD
2000 > LEXUS IS 300 & SPORT CROSS
2000-05 LEXUS IS 300 & SPORT CROSS
2006-08 LEXUS IS 350 RWD
2008 LEXUS IS F
1990-92 LEXUS LS 350
1990-00 LEXUS LS 400
1990-94 LEXUS LS 400
1995 > LEXUS LS 400 LARGE BRAKES
1995-00 LEXUS LS 400 LARGE BRAKES
2000 > LEXUS LS 430 LARGE BRAKES
2001-06 LEXUS LS 430 LARGE BRAKES
2007-08 LEXUS LS 460 (SPECIAL OFFSET)
1996-97 LEXUS LX 450
1997 > LEXUS LX 470
1998-07 LEXUS LX 470
2008 LEXUS LX 570
1998-03 LEXUS RX 300
2004-06 LEXUS RX 330
2007-08 LEXUS RX 350 FWD, RWD
2007-08 LEXUS RX 400H FWD, RWD
1998-03 LEXUS RX300
2004 > LEXUS RX330
1992-00 LEXUS SC 300
1992-96 LEXUS SC 300
1991-01 LEXUS SC 400
1992-00 LEXUS SC 400
2002 > LEXUS SC 430
2002-08 LEXUS SC 430
1991-97 LEXUS SE 330
Additional Wheel / Bolt Pattern Measurement Information
Key Identifying Wheel Dimensions: Wheel Bolt or Lug Pattern (or bolt circle, lug circle, lug pattern, etc.) is the measured diameter of an imaginary circle formed by the centers of the wheel lugs or bolt holes. Bolt patterns can be 3, 4, 5, 6, 7, 8 or 10 lug holes. A bolt circle of 5 x 4.5 would indicate a 5 lug bolt pattern on a circle with a diameter of 4.5 inches.
There are four important measurements that are used to categorize and identify a wheel for fitment purposes.
- Rim Diameter The actual diameter of the wheel at the point where the tire bead seats (NOT the outer lip of the rim).
- Rim Width Measure from the inside of the outer lip at the bead seating point to the inner lip.
- Back Spacing From the inside of the wheel at the point where it contacts the hub, brake drum or axle flange to the inside edge (lip) of the wheel.
- Bolt Pattern The measured diameter of an imaginary circle formed by the centers of the wheel lugs or bolt holes.
How To Measure Wheel Bolt Pattern
If there is an EVEN number of lugs: Measure center-to-center on lugs directly across from each other.
If there is an ODD number of lugs: Measure from the CENTER of one lug to the OUTER EDGE of the hole diagonally across from it.
Lug Nut Types
Bolt Pattern Torque Sequence / Specifications:
|Stud Size||Typical Torque Range in Ft/Lbs||Minimum Thread Engagement (turns)|
|12 x 1.5 mm||70 - 80||6.5|
|12 x 1.25 mm||70 - 80||8|
|14 x 1.5 mm||85 - 90||7.5|
|14 x 1.25 mm||85 - 90||9|
|7/16 in.||70 - 80||8|
|1/2 in.||75 - 85||8|
|9/16 in.||135 - 145||8|
Hub Center Bore
Hub Center Bore: Relates to the center hole in the wheel that centers the wheel on the hub of the car. Since most wheels are mass produced, they have a large center bore to accommodate several different vehicles. If this is the case, it is recommended that you use a hub ring. Hub rings are hard plastic or metal ring that fits between the wheel and the vehicle. This centers the wheel perfectly on the hub ensuring that there is no run out when the wheel is installed on to the vehicle. Without hub rings it is possible to get vibrations even if the wheel / tire assembly is perfectly balanced.
Wheel offset is the distance from the mounting surface of the wheel to the true center line of the rim. A positive offset means the mounting surface of the wheel is positioned in front of the true center line of the rim / tire assembly. This in effect brings the tire in to the fender well more. Conversely, a negative offset means the mounting surface of the wheel is behind the true center line of the rim / tire assembly. This will cause the tire to stick out away from the vehicle.
H = High - Positive Offset, typically FWD (Front Wheel Drive) +45, 40, 35 offsets
M = Medium - Neutral Offset, typically RWD (Rear Wheel Drive) +20 offset
L = Low - Zero to Negative Offset, Offset typically RWD (Rear Wheel Drive) 0 offset
Common Bolt Pattern Conversions
This information is accurate to the best of our knowledge. No warranties or guarantees are expressed or implied as to the accuracy of the information provided on this site. Use of this site constitutes your agreement to these terms.
- How to Measure Bolt Pattern Bolt pattern - diameter of an imaginary circle formed by the centers of the wheel lugs.
- Wheel Lug Nut / Bolt Torque Sequence Correct Wheel Lug Nut / Bolt Torque Sequence - 4 lug, 5 lug, 6 lug.
- How to Measure Wheel Back Spacing This measurement is important to be sure you have proper wheel clearance.
- How To Read A Tire Sidewall Learn to understand the common markings found on tire sidewalls.
- How To Plus Size Your Wheels
- Wheel, Tire and Fender Fitment Calculator Calculate Wheel Fitment, Tire Stretch and Rolling Radius. Includes Speedometer Error Calculator. Play with specs, try different settings and combinations, compare results.
- Tire Size Change / Speedometer Calibration Calculator This calculator is designed to give information related to tire size changes and the general impact they have on the calibration of a speedometer. It determines speedometer error and tire size information based on published and generally accepted tire dimensions as given by the standard US tire system (i.e. 205/45-ZR16). All calculations are based on the assumption of a new tire (as opposed to used) where the numbers on the tire accurately represent the dimensions.