Bolt Pattern Cross Reference and Wheel Sizes

What Wheels Fit HONDA ACCORD 4 LUG, 4 CYLINDER

4 X 4.5 Bolt Pattern Measurement and Specifications

4 Lug Bolt Pattern Measurement The 4 X 4.5 Bolt Pattern or Pitch Circle Diameter (PCD) is made up of the stud count (4) and the bolt circle measurement (4.5), the notional circle determined by the center position of the studs.

Equivalent Bolt Pattern: 4 X 114.3

How To Measure 4 Lug Bolt Patterns

Measure 4 lug wheel bolt patterns from center to center distance between two studs that are across the hub from each other. This measurement is your bolt pattern diameter. Learn more about wheel dimensions below.

What Vehicles Use Wheels With 4 X 4.5 Bolt Pattern?

The 4 X 4.5 bolt pattern is common to CHEVROLET, NISSAN, MITSUBISHI, HYUNDAI, ACURA, HONDA, SUZUKI, FORD, MAZDA, TOYOTA, GEO, KIA and other vehicles. A full list of vehicle makes and models appears below.

Bolt Pattern Torque Sequence / Specifications:

4 X 4.5 Bolt Pattern Torque Sequence Specifications: 1, 3, 2, 4

Note: Alloy wheels should always be installed using a torque wrench ensuring proper mount. Check your vehicle owner manual for proper specifications. How To Properly Torque Lug Nuts / Lug Bolts

Stud Size	Typical Torque Range in Ft/Lbs	Minimum Thread Engagement (turns)
12 x 1.5 mm	70 - 80	6.5
12 x 1.25 mm	70 - 80	8
14 x 1.5 mm	85 - 90	7.5
14 x 1.25 mm	85 - 90	9
7/16 in.	70 - 80	8
1/2 in.	75 - 85	8
9/16 in.	135 - 145	8

Wheel Bolt Torque and Stretch

It is prudent to re-torque wheels after about 60 to 90 miles (100km to 150km) of driving. Learn more about lug nuts and torque.

Hub Center Bore

Hub Centerbore Measurements Hub Center Bore: Relates to the center hole in the wheel that centers the wheel on the hub of the car. Since most wheels are mass produced, they have a large center bore to accommodate several different vehicles. If this is the case, it is recommended that you use a hub ring. Hub rings are hard plastic or metal ring that fits between the wheel and the vehicle. This centers the wheel perfectly on the hub ensuring that there is no run out when the wheel is installed on to the vehicle. Without hub rings it is possible to get vibrations even if the wheel / tire assembly is perfectly balanced.

Wheel Offset

Wheel offset is the distance from the mounting surface of the wheel to the true center line of the rim. A positive offset means the mounting surface of the wheel is positioned in front of the true center line of the rim / tire assembly. This in effect brings the tire in to the fender well more. Conversely, a negative offset means the mounting surface of the wheel is behind the true center line of the rim / tire assembly. This will cause the tire to stick out away from the vehicle.

Wheel Offset

H = High - Positive Offset, typically FWD (Front Wheel Drive) +45, 40, 35 offsets

M = Medium - Neutral Offset, typically RWD (Rear Wheel Drive) +20 offset

L = Low - Zero to Negative Offset, Offset typically RWD (Rear Wheel Drive) 0 offset

Wheel Offset Chart

Wheels, Spacers and Adapters

4 X 4.5 Wheel Spacers ~ Adapters ~ Wheels

Wheel Bolt Pattern by Make and Model

Comparing to HONDA ACCORD 4 LUG, 4 CYLINDER Center Bore: 64.1

Vehicle Make(s) with 4 X 4.5 Bolt Pattern:

HYUNDAI ~ INFINITI ~ KIA ~ MITSUBISHI ~ NISSAN ~ PLYMOUTH ~ SAAB ~ VOLVO ~ All Makes(s)

1995-99 HYUNDAI ACCENT

Bolt Pattern: 4 X 4.5
Stud Size: 12 X 1.5
Hub Center Bore: 67.1
Offset: H
> Bolt Pattern Details and Matching Vehicles
OEM Wheel Size(s): 13 X 5
Look-up: Spacers ~ Adapters ~ Wheels/Tires
Torque Sequence: 1, 3, 2, 4
75 to 85 lb-ft.
7 Turns Minimum

1995-99 HYUNDAI ACCENT3

Bolt Pattern: 4 X 4.5
Stud Size: 12 X 1.5
Hub Center Bore: 67.1
> Bolt Pattern Details and Matching Vehicles
Look-up: Spacers ~ Adapters ~ Wheels/Tires
Torque Sequence: 1, 3, 2, 4
75 to 85 lb-ft.
7 Turns Minimum

1992 > HYUNDAI ELANTRA

Bolt Pattern: 4 X 4.5
Stud Size: 12 X 1.5
Hub Center Bore: 67.1
Offset: H
> Bolt Pattern Details and Matching Vehicles
OEM Wheel Size(s): 14 X 6
Look-up: Spacers ~ Adapters ~ Wheels/Tires
Torque Sequence: 1, 3, 2, 4
75 to 85 lb-ft.
7 Turns Minimum

1992-06 HYUNDAI ELANTRA

1986-94 HYUNDAI EXCEL

1986-94 HYUNDAI EXCEL3

1990 > HYUNDAI SCOUPE, LS

1989 > HYUNDAI SONATA

1989-05 HYUNDAI SONATA

1997-02 HYUNDAI TIBURON

1997-99 HYUNDAI TIBURON

Bolt Pattern: 4 X 4.5
Stud Size: 12 X 1.5
Hub Center Bore: 67.1
Offset: H
> Bolt Pattern Details and Matching Vehicles
OEM Wheel Size(s): 15 X 7
Look-up: Spacers ~ Adapters ~ Wheels/Tires
Torque Sequence: 1, 3, 2, 4
75 to 85 lb-ft.
7 Turns Minimum

1997-99 HYUNDAI XC250

1991-03 INFINITI G20

Bolt Pattern: 4 X 4.5
Stud Size: 12 X 1.25
Hub Center Bore: 66.1
> Bolt Pattern Details and Matching Vehicles
Look-up: Spacers ~ Adapters ~ Wheels/Tires
Torque Sequence: 1, 3, 2, 4
75 to 85 lb-ft.
7 Turns Minimum

1991-96 INFINITI G20

Bolt Pattern: 4 X 4.5
Stud Size: 12 X 1.25
Hub Center Bore: 66.1
Offset: H
> Bolt Pattern Details and Matching Vehicles
OEM Wheel Size(s): 14 X 6
Look-up: Spacers ~ Adapters ~ Wheels/Tires
Torque Sequence: 1, 3, 2, 4
75 to 85 lb-ft.
7 Turns Minimum

1990-92 INFINITI M30

Bolt Pattern: 4 X 4.5
Stud Size: 12 X 1.25
Hub Center Bore: 66.1
Offset: M
> Bolt Pattern Details and Matching Vehicles
OEM Wheel Size(s): 15 X 6
Look-up: Spacers ~ Adapters ~ Wheels/Tires
Torque Sequence: 1, 3, 2, 4
75 to 85 lb-ft.
7 Turns Minimum

2001-03 KIA IMAGE

2001 > KIA OPTIMA

Bolt Pattern: 4 X 4.5
Stud Size: 12 X 1.5
Hub Center Bore: 67.1
Offset: H
> Bolt Pattern Details and Matching Vehicles
Look-up: Spacers ~ Adapters ~ Wheels/Tires
Torque Sequence: 1, 3, 2, 4
75 to 85 lb-ft.
7 Turns Minimum

2001-06 KIA OPTIMA LE, EX

2005-08 KIA SPECTRA EX, SX, SPECTRA 5

1983-88 MITSUBISHI CORDIA, TREDIA

Bolt Pattern: 4 X 4.5
Stud Size: 12 X 1.5
Hub Center Bore: 67.1
> Bolt Pattern Details and Matching Vehicles
OEM Wheel Size(s): 13 X 5.5
Look-up: Spacers ~ Adapters ~ Wheels/Tires
Torque Sequence: 1, 3, 2, 4
75 to 85 lb-ft.
7 Turns Minimum

1986-88 MITSUBISHI CORDIA, TREDIA

Bolt Pattern: 4 X 4.5
Stud Size: 12 X 1.5
Hub Center Bore: 67.1
> Bolt Pattern Details and Matching Vehicles
OEM Wheel Size(s): 14 X 5.5
Look-up: Spacers ~ Adapters ~ Wheels/Tires
Torque Sequence: 1, 3, 2, 4
75 to 85 lb-ft.
7 Turns Minimum

1991-95 MITSUBISHI EXPO

Bolt Pattern: 4 X 4.5
Stud Size: 12 X 1.5
Hub Center Bore: 67.1
> Bolt Pattern Details and Matching Vehicles
OEM Wheel Size(s): 14 X 6
Look-up: Spacers ~ Adapters ~ Wheels/Tires
Torque Sequence: 1, 3, 2, 4
75 to 85 lb-ft.
7 Turns Minimum

1985-96 MITSUBISHI GALANT

1985-98 MITSUBISHI GALANT

2002 > MITSUBISHI LANCER LS 15"

2002-07 MITSUBISHI LANCER PZ, RALLY, RALLIART

1985-92 MITSUBISHI MIRAGE

1985-92 MITSUBISHI MIRAGE 3

1983-93 MITSUBISHI PRECIS

1983-93 MITSUBISHI PRECIS 3

1983-87 MITSUBISHI STARION

1984-88 NISSAN 200SX & TURBO

Bolt Pattern: 4 X 4.5
Stud Size: 12 X 1.25
Hub Center Bore: 66.1
Offset: H
> Bolt Pattern Details and Matching Vehicles
OEM Wheel Size(s): 15 X 6
Look-up: Spacers ~ Adapters ~ Wheels/Tires
Torque Sequence: 1, 3, 2, 4
75 to 85 lb-ft.
7 Turns Minimum

1989-96 NISSAN 240SX

1970-85 NISSAN 240Z, 260Z, 280Z

Bolt Pattern: 4 X 4.5
Stud Size: 12 X 1.25
Hub Center Bore: 66.1
Offset: L
> Bolt Pattern Details and Matching Vehicles
OEM Wheel Size(s): 14 X 6
Look-up: Spacers ~ Adapters ~ Wheels/Tires
Torque Sequence: 1, 3, 2, 4
75 to 85 lb-ft.
7 Turns Minimum

1984-86 NISSAN 300ZX

Bolt Pattern: 4 X 4.5
Stud Size: 12 X 1.25
Hub Center Bore: 66.1
Offset: L/M
> Bolt Pattern Details and Matching Vehicles
OEM Wheel Size(s): 14 X 6
Look-up: Spacers ~ Adapters ~ Wheels/Tires
Torque Sequence: 1, 3, 2, 4
75 to 85 lb-ft.
7 Turns Minimum

1993-01 NISSAN ALTIMA

1990 > NISSAN AXXESS

Bolt Pattern: 4 X 4.5
Stud Size: 12 X 1.25
Hub Center Bore: 66.1
> Bolt Pattern Details and Matching Vehicles
OEM Wheel Size(s): 14 X 5.5
Look-up: Spacers ~ Adapters ~ Wheels/Tires
Torque Sequence: 1, 3, 2, 4
75 to 85 lb-ft.
7 Turns Minimum

1985-88 NISSAN MAXIMA

1983-86 NISSAN SENTRA

Bolt Pattern: 4 X 4.5
Stud Size: 12 X 1.25
Hub Center Bore: 66.1
Offset: H
> Bolt Pattern Details and Matching Vehicles
OEM Wheel Size(s): 13 X 5.5
Look-up: Spacers ~ Adapters ~ Wheels/Tires
Torque Sequence: 1, 3, 2, 4
75 to 85 lb-ft.
7 Turns Minimum

2000 > NISSAN SENTRA & SE-R

2000-06 NISSAN SENTRA S, SE, R, SER

2007-08 NISSAN SENTRA S, SL

1979-83 NISSAN STANZA

Bolt Pattern: 4 X 4.5
Stud Size: 12 X 1.25
Hub Center Bore: 66.1
Offset: H
> Bolt Pattern Details and Matching Vehicles
OEM Wheel Size(s): 13 X 4.5
Look-up: Spacers ~ Adapters ~ Wheels/Tires
Torque Sequence: 1, 3, 2, 4
75 to 85 lb-ft.
7 Turns Minimum

1987-92 NISSAN STANZA

1987-92 NISSAN STANZA 87-92

2007-08 NISSAN VERSA 1.8S, 1.8SL

1985-94 PLYMOUTH VISTA

1984-87 SAAB 900, TURBO

Bolt Pattern: 4 X 4.5
Stud Size: 1/2-RH
Hub Center Bore: 71.5
Offset: H
> Bolt Pattern Details and Matching Vehicles
OEM Wheel Size(s): 15 X 6
Look-up: Spacers ~ Adapters ~ Wheels/Tires
Torque Sequence: 1, 3, 2, 4
75 to 85 lb-ft.
8 Turns Minimum

1998-03 VOLVO 40 SERIES

Bolt Pattern: 4 X 4.5
Stud Size: 12 X 1.5b
Hub Center Bore: 67
Offset: H
> Bolt Pattern Details and Matching Vehicles
OEM Wheel Size(s): 15 X 6
Look-up: Spacers ~ Adapters ~ Wheels/Tires
Torque Sequence: 1, 3, 2, 4
75 to 85 lb-ft.
7 Turns Minimum

2004 > VOLVO 40 SERIES

Bolt Pattern: 4 X 4.5
Stud Size: 12 X 1.5b
Hub Center Bore: 67
Offset: H
> Bolt Pattern Details and Matching Vehicles
OEM Wheel Size(s): 15 16
Look-up: Spacers ~ Adapters ~ Wheels/Tires
Torque Sequence: 1, 3, 2, 4
75 to 85 lb-ft.
7 Turns Minimum

1998-04.5 VOLVO 40 SERIES 4-LUG (MID-YEAR CHANGES)

Additional Wheel / Measurement Information

Key Identifying Wheel Dimensions: Wheel Bolt or Lug Pattern (or bolt circle, lug circle, lug pattern, etc.) is the measured diameter of an imaginary circle formed by the centers of the wheel lugs or bolt holes. Bolt patterns can be 3, 4, 5, 6, 7, 8 or 10 lug holes. A bolt circle of 5 x 4.5 would indicate a 5 lug bolt pattern on a circle with a diameter of 4.5 inches.

Wheel Dimensions

There are four important measurements that are used to categorize and identify a wheel for fitment purposes.

Wheel Dimensions

Rim Diameter The actual diameter of the wheel at the point where the tire bead seats (NOT the outer lip of the rim).
Rim Width Measure from the inside of the outer lip at the bead seating point to the inner lip.
Back Spacing From the inside of the wheel at the point where it contacts the hub, brake drum or axle flange to the inside edge (lip) of the wheel.
Bolt Pattern The measured diameter of an imaginary circle formed by the centers of the wheel lugs or bolt holes.

How To Measure Wheel Bolt Pattern

If there is an EVEN number of lugs: Measure center-to-center on lugs directly across from each other.

If there is an ODD number of lugs: Measure from the CENTER of one lug to the OUTER EDGE of the hole diagonally across from it.

Lug Nut Types

Lug Nuts and Torque

Common Bolt Pattern Conversions

4-100

4x3.94

4-108

4x4.25

4-110

4x4.33

4-114.3

4x4.5

5-100

5x3.94

5-108

5x4.25

5-110

5x4.33

5-112

5x4.41

5-114.3

5x4.5

5-115

5x4.52

5-120

5x4.72

5-120.7

5x4.75

5-127

5x5

5-130

5x5.12

5-135

5x5.3

5-139.7

5x5.5

6-114.3

6x4.5

6-127

6x5

6-135

6x5.3

6-139.7

6x5.5

8-165.1

8x6.5

8-170

8x6.69

This information is accurate to the best of our knowledge. No warranties or guarantees are expressed or implied as to the accuracy of the information provided on this site. Use of this site constitutes your agreement to these terms.