|
|
Clean-Rite Microfiber Cleaning Towels
Lifts Dirt and Dust - Cleans without Chemicals - Wet or Dry - Safe on All Surfaces - Reusable! Innovative microfiber design allows you to clean virtually any surface without sprays, polishes or chemicals. Each cloth has thousands of tiny fibers that trap and pick up dirt, dust and debris. Super soft fibers will not scratch or smear. Safe for glass, mirrors, lenses, computer and television screens. For tough, dried on stains, spray cloth lightly with water. Great for detailing interior and exterior of vehicles. Safe for clear-coat surfaces. Use on windshields and chrome. View Item Details...
|
$0.99
|
|
|
|
4 3/4 Inch Multi-Purpose Welding Magnet / Panel Holder
Hold material at 45°, 90°, and 135° for easy welding or soldering. Frees up your hands so you can concentrate on your work. Use as a floater to separate steel plates. Sticks to any ferrous metal object. Maximum lift: 20 lbs. View Item Details...
|
$3.95
|
|
|
|
Adjustable Angle Welding Magnet / Panel Holder
Ideal for welding and assembly applications. Swivel arms hold objects at almost any angle. Magnet swivels a full 360° and holds up to 50 lbs. 2-1/2 Inch x 3-3/8 Inch' ceramic magnets. View Item Details...
|
$6.95
|
|
|
|
HyloCool Thermal Heat Barrier Gel
HyloCool is an aqueous gel that adheres to horizontal and vertical surfaces, even when heated, and absorbs heat. HyloCool Thermal Barrier Gel works by trapping water on the surface of the substrate. Its additives and surfactants reduce the boiling point of the water, increase the surface area in contact with the metal, and hold the gel in place. The phase change from liquid to gas absorbs the heat as evaporative cooling. Under high or sustained heat HyloCool will evaporate, leaving a minimal amount of residue behind. View Item Details...
|
$18.95
$16.99
Save $1.96!
|
|
|
|
Welders Sheet Metal Butt Joint Panel Clamps - Set of Six
Zinc-Plated Panel clamps make welding butt joints a breeze. Make precision, clean butt welds that require minimal grinding. Set of six clamps. View Item Details...
|
$12.95
|
|
|
2 Inch Traditional Rubber Medium Flex Type R Roloc Sanding Disc HolderWas $8.99 Now $4.49
Save $4.50!!!
View Item Details...
|
2 Inch Traditional Rubber Medium Flex Type R Roloc Sanding Disc Holder
1/4 Inch Shank. 30,000 Max RPM. Made of high-impact, medium flex rubber with a metal locking device for quick changes of discs. Interchangeable with 3M Roloc System. For use with surface-conditioning and coated abrasive Roloc discs - drill or die-grinder. View Item Details...
|
$8.99
$4.49
Save $4.50!
|
|
|
|
4 Inch Magnetic Parts Tray
Polished stainless steel construction. Holds metal nuts, bolts, screws, washers, clamps and other small metal objects. Includes rubber-coated magnet to prevent marring of surfaces. View Item Details...
|
$3.99
|
|
|
|
Extra Long Circuit Tester
Check electrical circuits and accessories on both 6 volt (6V) and 12 volt (12V) systems. Extra long 12 foot cord length. Made with 20 gauge wire. Replaceable bulb. View Item Details...
|
$3.95
|
|
|
|
Inline Ignition Spark Tester
Tests ignition for spark condition. Simply place this tester between the spark plug ang the spark plug wire. The tester will light up is a spark is being produced. Essential for trouble shooting all internal combustion engines. View Item Details...
|
$4.95
|
|
|
|
Mechanic`s Stethoscope
Finds bumps and squeaks from the engine to the dashboard. View Item Details...
|
$4.95
|
|
|
|
Oxygen Sensor Thread Chaser - M18 x 1.5
Cleans threads in Oxygen Sensor holes. Use with 3/4 Inch hex socket or 3/8 Inch square dirve. Size: M18 x 1.5 - Also works on M18 x 1.5 spark plug threads. Important: Use anti-seize. View Item Details...
|
$4.49
|
|
|
|
Pneumatic Spark Plug Cleaner
This cleaner does abrasive cleaning or air cleaning with just the turn of a switch. Simply hook your compressor hose to the cleaner, insert the plug in the opposite end, set the switch for abrasive or air cleaning, push the start button, and get ready to return plugs to a like-new condition.
· Abrasive blasting removes carbon build-up on spark plugs
· Abrasive material is supplied
· Flange on each side lets you fasten the cleaner to your workbench
Air consumption: 7.7 CFM; Air inlet: 1/4'' NPT; Pressure rating: 90 PSI View Item Details...
|
$9.95
|
|
|
|
Round Wire Spark Plug Gauge / Gap Gauge Tool - Standard / Metric
Electrode adjuster, Decimal and Metric wire test loops. 7 Sizes: .020 to .040 Inches. Check photo for best description. View Item Details...
|
$1.49
|
|
|
|
Spark Plug Gap Guage
Circular coin-type ramp gauge easily measures spark plug gaps from 0.020 to 0.100 Inch (0.635 to 1.143mm). View Item Details...
|
$3.99
|
|
|
3M Quick Fix Adhesive - Instantly Bonds Metal, Plastic and RubberWas $19.99 Now $13.99
Save $6.00!!!
View Item Details...
|
3M Quick Fix Adhesive - Instantly Bonds Metal, Plastic and Rubber
3M quick fix adhesive dries in seconds after application to form strong, clear bonds on most close-fitting surfaces. This adhesive is ideal for bonding automotive emblems, loose moldings, rubber bumper guards, dashboard trim, and almost any area where something needs a quick, permanent bonding. View Item Details...
|
$19.99
$13.99
Save $6.00!
|
|
|
1/4-Inch to 1-3/8-Inch - 1/2-Inch Shank Step Drill Bit / UnibitWas $18.99 Now $13.99
Save $5.00!!!
View Item Details...
|
1/4-Inch to 1-3/8-Inch - 1/2-Inch Shank Step Drill Bit / Unibit
Self-Starting Step Drill Unibit that covers 10 sizes: 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8. Stout 1/2-Inch Shank. This Step Drill Bit is ideal for variety of materials including metal, plastic, fiberglass to wood. View Item Details...
|
$18.99
$13.99
Save $5.00!
|
|
|
|
7/64 Inch HS High Speed Drill Bits - Six (6) Pack
Sold in Lots of Six (6) View Item Details...
|
$2.49
|
|
|
|
Black & Decker Wood / Metal Jig Saw Blades Value Pack
Brand New Seven (7) Piece Black & Decker Wood / Metal Jig Saw Blades Value Pack. Set Contains:
- (2) 6 TPI Rough Wood Finish Jigsaw Blades
- (1) 10 TPI Smooth Wood Finish Jigsaw Blade
- (1) 10 TPI Scrolling Wood Finish Jigsaw Blade
- (1) 14 TPI Thick Metal Jigsaw Blades
- (1) 18 TPI Medium Metal Jigsaw Blades
- (1) 24 TPI Thin Metal Jigsaw Blade
Works with most major brands. Part # 75-621 View Item Details...
|
$3.99
|
|
|
|
Bosch T-Shank Jig Saw Blades Value Pack
Brand New BOSCH T503 3 Piece Bi-Metal T-Shank Laminate Flooring Jig Saw Blade Set -- The New BOSCH InchSpecial for Laminate Inch jigsaw blade was specifically developed to produce clean cuts in laminate flooring, even when the laminate panel is cut Inchfrom above. Inch The new bi-metal laminate flooring blades cut 2X faster and last 10X longer than standard high carbon steel blades, providing precise, clean cuts.
- Taper Ground - for optimal speed and increased blade life
- Pointed Teeth - for precise clean cuts in laminate flooring and boards (14 & 20 TPI) on both sides of the workplace
- Bi-Metal- Laser-welded Bi-Metal blade for long life. Specifically designed to cut extremely abrasive laminate flooring
View Item Details...
|
$9.99
|
|
|
|
Century Carbide 22° Bevel Laminate Trim Router Bit
Brand New Century Carbide 22° Bevel Laminate Trim Router Bit - 21/32 Inch Cutting Diameter. Two Flutes. For bevel cuts, bearing prevents marring. View Item Details...
|
$9.99
|
|
|
Craftsman Tap 1/4-20 NC National Coarse ThreadsWas $2.99 Now $1.99
Save $1.00!!!
View Item Details...
|
Craftsman Tap 1/4-20 NC National Coarse Threads
For use with #7 drill bit. Made in USA. Sold Each. View Item Details...
|
$2.99
$1.99
Save $1.00!
|
|
|
|
Diamond Hole Saw Set 1/2 Inch & 1 Inch w/ 1/4 Inch Shank
Diamond Life brand diamon hole saw set - 1/2 Inch & 1 Inch w/ 1/4 Inch shank. Diamond coating for superior performance and life. Excellent results in glass, marble, slate and tile. Nickel plated. View Item Details...
|
$4.99
|
|
|
|
Dremel #426 1-1/4 Inch Reinforced Cut Off Wheels - 5 Pack
For slicing and cutting metals. Can also be used on metals and wood. New in Original Manufacturer Packaging. View Item Details...
|
$7.99
|
|
|
|
Hand Tap #8-32 NC National Coarse Threads
For use with #29 drill bit. Made in USA. Sold Each. View Item Details...
|
$2.79
$1.79
Save $1.00!
|
|
|
|
Hand Tap 3/8 Inch NC National Coarse Threads w/ 9/32 Inch HS Drill Bit
For use with 9/32 inch drill bit - included. Made in USA. View Item Details...
|
$5.99
|
|
|
|
Makita 3/8" Vee Grooving Carbide Tipped Router Bit
Brand New Makita Carbide Tipped 3/8 Inch (9.53mm) Vee Grooving Router Bit. Made in USA. View Item Details...
|
$7.49
|
|
|
Two (2) Piece Titanium Nitride Coated M2 High Speed Steel Step DrillsWas $19.99 Now $17.49
Save $2.50!!!
View Item Details...
|
Two (2) Piece Titanium Nitride Coated M2 High Speed Steel Step Drills
Two (2) Piece Titanium Nitride Coated M2 High Speed Steel Step Drills in Original Manufacturer Packaging. This compact set replaces 23 individual drill bits. Two-flute design gives you faster, smoother cutting. Titanium nitride coating for cooler running. Automatically deburrs holes as you drill. M2 high speed steel for long life. View Item Details...
|
$19.99
$17.49
Save $2.50!
|
|
|
|
Vermont American 1/2 Inch Dovetail High Speed Router Bit
Brand New Vermont American 1/2 Inch (12.7mm) High Speed Steel Dovetail Router Bit. View Item Details...
|
$6.49
|
|
|
|
Vermont American 1/2 Inch Hinge Mortising Steel Router Bit
Brand New Vermont American 1/2 Inch (12.7mm) High Speed Steel Hinge Mortising Router Bit. Rabbets and Dadoes. View Item Details...
|
$6.49
|
|
|
|
Vermont American 1/2 Inch Hinge Mortising Steel Router Bit
Brand New Vermont American Carbide 1/2 Inch (12.7mm) Hinge Mortising Router Bit. Rabbets and Dadoes. Made in USA. View Item Details...
|
$6.99
|
|
|
|
Vermont American 1/2 Inch Titanium Plunge Cut Router Bit
Brand New Vermont American 1/2 Inch (12.7mm) Titanium Plunge Cutting Straight High Speed Steel Router Bit - Industrial. View Item Details...
|
$6.49
|
|
|
|
Vermont American 1/4 Inch Rabbeting Steel Router Bit
Brand New Vermont American 1/4 Inch (6.35mm) High Speed Steel Rabbeting Router Bit w/ 3/16 Inch Pilot. View Item Details...
|
$6.49
|
|
|
|
Vermont American 3/8 Inch Cove High Speed Steel Router Bit
Brand New Vermont American 3/8 Inch (9.53mm) Cove High Speed Steel Router Bit w/ 3/16 Inch Pilot. Made in USA. View Item Details...
|
$6.49
|
|
|
|
Vermont American 3/8" Rabbeting Steel Router Bit
Brand New Vermont American 3/8 Inch (9.53mm) High Speed Steel Rabbeting Router Bit w/ 3/16 Inch Pilot. View Item Details...
|
$6.49
|
|
|
|
Vermont American 5/64 (2.0) Jobber Length Drill Bits - Ten (10) Pack
Vermont American Industrial Grade Drill Bits. View Item Details...
|
$3.99
|
|
|
|
Empire Standard Line Level
Lightweight construction minimizes line sag. Unbendable open hooks allow level to slide freely. Pocket clip will guard tool against loss. View Item Details...
|
$2.99
|
|
|
Six (6) Inch Stainless Steel Frame Dial CalipersWas $16.99 Now $11.99
Save $5.00!!!
View Item Details...
|
Six (6) Inch Stainless Steel Frame Dial Calipers
Stainless Steel Frame. Direct reading for quick and easy outside, inside depth and step measurements - 0.001 Inch accuracy. Scale surface satin finished with clear crisp engraved graduations. Measuring faces are hardened, ground and lapped. Lock for repetitive settings. Stainless steel main scale is hardened and ground. View Item Details...
|
$16.99
$11.99
Save $5.00!
|
